, Materials 
 A. Table: walnut, cherry, teak, beech, mahogany wood and so on imports of veneer (thickness: 0.6mm or more); 
 Two. Substrate: the selection of imported, high-density particle board, fiberboard, bending and strong, not easily deformed; 
 3. Wood: imported teak, walnut, beech, moisture content below 12%, to ensure that small deformation, no cracking; 
 4. Painting: The German brand IDOPA "wood for paint spray finish, finish in a high degree of dust temperature and humidity room. The most advanced paint saturation process carefully in order to ensure the table flat particles, bubbles, slag point, color uniformity; 
 5 Metal parts: Italy "SH" hinges, Germany "of BMB three rails, locks and Germany" HAFELE "," GLASS "series of hardware accessories. 
 Second, the processing methods 
 A. Wood is dried to moisture content less than 12%; 
 Two. Wood products of all kinds of styles substrate (white); 
 3. Baipi Sanding Sealer closed to prevent moisture exchange with the outside world; 
 4. Spray primer dry and then sanding; 
 5 In constant temperature and humidity, highly dust-proof finish room spray finish, the saturation of the most advanced paint process carefully. 
 Third, the quality of the basic requirements 
 A. Table flat, the flatness of 0.006mm, veneer and solid wood edge stitching close, the appearance of the junction gap is less than 0.1mm; 
 Two. Uniform and neat lines, over the natural corner; 
 3. Formation of countertops, paint-free particles, bubbles, slag point, uniform color (except natural texture of wood); 
 4. Product hardware to connect the pieces of stitching, the overall look close, the gap is small and uniform; 
 5 Whole grain, wood color consistent and natural transition.